 |
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
Here are the list of products available M54617-B Aspen Oak White (Barnside Emboss) M4107-T Ice Maple (Tick Smooth Emboss) M4142-B Buttercream (Barnside Emboss) M4146-B Hazelnut (Barnside Emboss) M187214-I 2 Strips Rustic Maple (In-Registered Emboss) M4181-B American Black Walnut (Barnside Emboss) M54112-H Rough Hewn Hickory (Hand scrap Emboss) M66314-I 2 Strips Natural Hickory (In-Registered Emboss) M66412-I 2 Strips Natural Cherry (In-Registered Emboss) M66512-I 2 Strips American Black Walnut (In-Registered Emboss) M66714-I 2 Strips Gray Oak (In-Registered Emboss) M72513-I Markham Oak Medium (In-Registered Emboss) M72516-I Kentucky Oak (In-Registered Emboss) M725110-I Markham Oak Light (In-Registered Emboss) M546128-B Aspen Oak Black (Barnside Emboss) M63696-I Durban Oak (In-Registered Emboss)
ALLURE MAINTENANCE SOLUTION - THE EASY WAY TO CLEAN & MAINTAIN YOUR BEAUTIFUL FLOOR
Everything you need to clean and to rejuvenate your resilient flooring
ALLURE NEUTRAL FLOOR CLEANER High-performance concentrated cleaner for floors. Breaks up and disperses stubborn grease, dirt and oil deposits, for damp-mopping and moderate to heavy scrubbing, or for use with automatic floor scrubbing machines. Neutral pH won’t harm floor finishes. Maintains existing floor finish with no film. It is a no-rinse cleaner for all vinyl floors and is PH neutral. This cleaner is phosphate-free and suitable for household or commercial use. ALLURE RESILIENT FLOOR POLISH
A blended acrylic and urethane polymer system formulated to protect and enhance Allure Plank and Tile Flooring. This self-sealing, extended wear formula protects the surface against scuffing and scratching while retaining a beautiful gloss. Specifically formulated for residential to heavy commercial maintenance programs.
<
ALLURE NEUTRAL FLOOR CLEANER
REGULAR MAINTENANCE Recommended for daily cleaning of all types of resilient tile and hard surfaces. Sweep or dust mop the floor to remove any large debris. Dilute with cool to warm water. For light to medium cleaning, dilute 1 part concentrated cleaner to 10 parts water (1:10). For heavy cleaning, dilute 1:6. For machine application, follow industry practices for the machine and recommended dilution rates; from 1:5 to 1:10. Allow floor to dry completely before applying polish.
ON NEW FLOORS Use this cleaner to prepare floor for polish application. NOTE: If a new floor has had much construction traffic, it is recommended that Allure Floor Stripper be used first.
Directions For Use:
Read the entire label before using this product. Recommended for use on Allure and most types of resilient tile and plank flooring. Safe for use on: Linoleum; Marble; Tile; Vinyl; Wood
ALLURE RESILIENT FLOOR POLISH
INITIAL OR RESTORATIVE MAINTENANCE Completely remove all old wax, polish and soil from floor surface following instructions on Allure Stripper label. Even new floors should be stripped after the installation process. Floor surface must be clean, dry and free of residue before polish is applied. Apply polish in uniform, thin coats using a clean synthetic polish mop or applicator. Apply polish in the direction of the grain or texture of the flooring.
Allow each coat to dry thoroughly before applying additional coats, usually 20-30 minutes. 2-3 thin coats of polish are recommended for residential use, 3-4 thin coats for light commercial, or 4-5 thin coats for heavy commercial. Several thin coats offer much more protection than a few thick coats.
R OUTINE MAINTENANCE Sweep large debris, dust mop and clean. Damp mop or automatic scrub using Allure Neutral pH Cleaner. Floor surface must be clean, dry and free of residue before polish is applied. Mop polish (in thin coats), buff or burnish the floor as desired. Apply 1-2 coats of polish as directed above |
